Home / Products / MAGPro2 tools

MAGPro2 X17 tool it a solution for cars equipped with EDC17, MED17, MEDV17 and other last generations of ECUs. The device supports CAN-bus (ISO 15765-4 & SAE-J2234), K-line (ISO 9141-2 & ISO 14230-4), TP2.0 and UDS protocols. In most cases checksum correction is done on fly without online connection. Thanks to a wide range of accessories you can read / write the content using the OBDII socket. Including Breakbox interface with cables which allows for the operations on TRICORE equipped ECUs by boot loader. Revolutionary functions as Full ECU Backup (which are saved automatically up to 500 readouts directly into X17 interface) and Data Buffering (in case of malfunction of your PC, it completes the writing as if the failure didnÕt occurred) it guarantees failsafe operations on a new generation and expensive ECUs. Additional services such as DPF-OFF, Immo OFF, HotStart Repair etc are available for all users of X17 tools. Tool is available in MASTER and SLAVE versions. X17 tool is available as additional module for MAGpro2 BASE and Standalone versions. For the first year the updates and support are included in price.

MAGPro2 BDM programmer is a modern device that allows you reading, programming, making backup, and restoring three main ECUsÕ components with Microprocessor Motorola Series MPCXX within the ECU and it supports a lot of cars, bicycles, trucks and tractors. The communication between BDM programmer and ECU takes place by using 8 cables and bench with special adapters (optional). There is NO necessity to solder any contact strip bars on the BDM port of the ECU in order to create a connector on the board. Backup/Restore functions allow you to read all the contents of the ECU in a unique file. The accuracy of this reading is ensured by a special software procedure that checks automatically the data. Security is furthermore ensured thanks to automatic Checksum corrections during the writing procedure. Through these two functions you can always undo the actions done, restore the initial conditions of the ECU (except for physical ECU damages). WhatÕs more: thanks to Backup/Restore functions you can also create a copy of the ECU which can be used on another hardware, in case the original one was destroyed or merely damaged. BDM Programmer is available as add-on module for MAGPro2 BASE OBD tool and as Standalone BDM tool. Its strongly recommended to use MAGpro2 BDM with MAG Bench (optional).

T-BOOT boot loader tool supports now Infineon TRICORE based on ECUs including latest antituning protections and all types of XROM memories: SPANSION: CD016J, CD032J and also the newest one: CL016J and CL032J (not supported now by no one else). All checksums are calculated on fly automatically. T-BOOT together with other accessories firmed MAGICMOTORSPORT launch new quality in Tricore chiptuning: -no soldering (optional MAGBench with adapters: boot universal, tricore main etc): -no short-circuits by wrong wires connections (optional ECU Connectors) details here -No problems with power supply (optional Breakbox ver 2.0: including software for monitoring of power supply, current, communication lines etc.) Software T-boot offers automatic backup of ECU contents as well as already known in X17 tool recovery functions (for example you can restart IROM/XROM writing procedure even if it was interrupted). T-Boot as all other tools is covered by our Technical Support online by chat, email, Ticket & phone. The new tool is available both in Master and Slave versions. For the first year the updates and support are included in price.

MAGPro2 Tools

All necessary cables & accessories to start working are included in kit. No need to make cables or purchase additional AC/DC adapters etc.

MAGPro2 tools are delivered in a convenient carrying case

Click here to see accesories page...

It is supported ECUsMarelli IA.W59F, 59M, 5AM, 5SF

Functions: Decode, Immo OFF (without opening ECU) SW change M2, M3, M5, M7, M9

The cables are included with connector for Marelli IAW5, IAW59 and IAW5SF and power adapter.

MAGPro2 BASE OBD (code: MAGP1.1) allows the communication with a huge number of vehicles, including reading and writing through the use of simple connections with simple and fast software . The device supports CAN-bus (ISO 15765-4 & SAE-J2234), K-line (ISO 9141-2 & ISO 14230-4) and FORD SAE J1850PWM) protocols. In most cases (euro 4 & 5 vehicles) crc correction is done automatically. Thanks to a wide range of accessories you can read / write the content using the OBDII diagnostic connection or by the dock (using the BREAKBOX interface contained in kit). For cars without OBDII socket, the specific cables are included. MAGPro2 offers injectors coding function for the cars such as: Renault, Nissan and PSA group (necessary after writing the modified file to ECU). The sophisticated structure of the MAGPro2 offers the advanced functions of software (RECOVERY MODE) Optional internal BDM module (code: MAGP1.11) gives the opportunity to backup, elaborate and clone ECUs with Motorola 5xx MCU. BDM module support also Spansion memories installed in the newest FORDÕs and FIATÕs ECUs. Additional services such as DPF-OFF, Immo OFF, HotStart Repair etc are available for all users of MAGPro2 BASE tools. Tool is available in MASTER and SLAVE versions.

AIRBAG REVITALIZER ver 1.1

crash reset, EE read/write, read PIN, read/erase DTC + to be used with Breakbox of MAGPro2.

There is only one annual fee for all MAGPro2 products. If you have one of them or all all MAGPro2 products, you still pay only one small annual fee to get access to the databases of files & manuals, technical support, updates and free of charge services.

call: +39 (0)91 748-77-22
fax: +39 (0)91 748-77-24

Products & accessories
MAGPro2 Tools